Installation manuals

Oberheim 4 / 8-Voice FVS-1 MIDI retrofit Vitalk...

This MIDI board will work only with early type of keyboard. Before 1977. With one common bus. Installation:To your good usability select the friendly place to mount the LED, DIN5...

Oberheim 4 / 8-Voice FVS-1 MIDI retrofit Vitalk...

This MIDI board will work only with early type of keyboard. Before 1977. With one common bus. Installation:To your good usability select the friendly place to mount the LED, DIN5...

Siel Cruise (mono or poly only Rev A03) MIDI ki...

This manual contains instruction only for Mono or Poly section of synth. For doubled version manual (for boards Rev5.1) click here. Installation: Select the right place to mount the LED,...

Siel Cruise (mono or poly only Rev A03) MIDI ki...

This manual contains instruction only for Mono or Poly section of synth. For doubled version manual (for boards Rev5.1) click here. Installation: Select the right place to mount the LED,...

Crumar Performer/Stratus/Trilogy MIDI retrofit ...

Installation:Select the right place to mount the LED, DIN5 MIDI connector and button on your synth (on the back panel near jacks for example). PCB can be mounted under the...

Crumar Performer/Stratus/Trilogy MIDI retrofit ...

Installation:Select the right place to mount the LED, DIN5 MIDI connector and button on your synth (on the back panel near jacks for example). PCB can be mounted under the...

Tom 1501 MIDI kit retrofit Installation manual

This retrofit controlling only the keyboard and you still can play on it at same time. This retrofit only for key triggering through MIDI. Octave transposing through MIDI is not...

Tom 1501 MIDI kit retrofit Installation manual

This retrofit controlling only the keyboard and you still can play on it at same time. This retrofit only for key triggering through MIDI. Octave transposing through MIDI is not...

Formanta Faemi-M, Faemi-1M MIDI kit installatio...

This manual fit for Faemi-1m and Faemi-M Installation: Select the right place to mount the LED, DIN5 MIDI connector and button on your synth (on the back panel near jacks...

Formanta Faemi-M, Faemi-1M MIDI kit installatio...

This manual fit for Faemi-1m and Faemi-M Installation: Select the right place to mount the LED, DIN5 MIDI connector and button on your synth (on the back panel near jacks...

Crumar Performer/Stratus/Trilogy MIDI retrofit ...

Installation:Select the right place to mount the LED, DIN5 MIDI connector and button on your synth (on the back panel near jacks for example). PCB can be mounted under the...

Crumar Performer/Stratus/Trilogy MIDI retrofit ...

Installation:Select the right place to mount the LED, DIN5 MIDI connector and button on your synth (on the back panel near jacks for example). PCB can be mounted under the...